Trasporto
MAIN STRUCTURAL CHARACTERISTICS
All transport tanks are manufactured entirely out of AISI 304 or AISI 316L stainless steel with our exclusive antirupture system and independent self-supporting stainless steel frame. The tank is anchored using adjustable stainless steel straps and rests on a rubber-lined saddle to eliminate vibrations during transportation and structural fatigue due to strong vibrations caused by rough roads and which can cause tank welds to break. Bottoms are pressed enbloc with large rounded edges to give more strength to the entire tank.
All tanks are provided with dia. 400 mm high neck cover and hinged cover with wind-protection opening, double acting air relief valve and total discharge valve of the desired type and diameter. Tank interiors are "BA" food grade mirror finish polished with flat circular, laminated, rolled, shaved and polished welds. The outer surfaces of the tank are patterned with standard satin-finish welds. In the case of multi-compartment tanks the bottoms and counter bottoms which from the inner partition are made with large welded edges to increase strength and permit careful cleaning (even in parts that are hard to get at).
ACCESSORIES AND FINISHES
All tanks may be provided with thermal conditioning double walls that use circulating hot/cold fluids or electric heating coils that immerge directly in the fluid or in a double wall in a bain-marie. They can be totally insulated with 40/80 mm thick rock wool mattress for heat liquid and with sealed external stainless steel shell and injected polyurethane for cold liquid, equipped with insulated stainless steel double door on the cover. They can include, as accessories, a temperature thermometer, a probe connection, a loading and drain valve, loading tubes, a fixed washing system from above, fixed or mobile stirrers, slow central vertical stirrers or inclined lateral fast stirrers, powered by 380V or 24V, to mix products or keep them in suspension.
We can provide the tank mounted on the trailer-truck and fully certified, complete with tubes, valves and vacuum pump made of stainless steel, control board, tank designed to operate with vacuum using vacuum pump that sucks up delicate or perishable products or pressurized tanks with PED testing. On request we manufacture certified "mobile" tanks that are insulated and thermally conditioned, equipped with stirrers, control boards, fixed or mobile refrigeration units or independent electric heating coils. Our products adapt to your requirements and your products, whether they are foodstuffs, perishables, concentrates with increased specific weights, chemicals, toxic/noxious products, pharmaceuticals. Our Engineering Department designs and proposes solutions for every type of product depending on your needs.
Attachments
Request information about this product
