The classical wine-making process known as deléstage is offered in a totally automated plant. In the deléstage all the must is taken from the lower part of the fermenting tank and from there, by gravity, is sent to a collecting tank placed at a lower level. Then the must is pumped to the fermentors again and spread over the grapes skin cap by means of a rotating head. during the transfer it is possible to heat or to refrigerate the must. During fermentor emptying the skin cap goes down and passes through a dedicated cap-breaker, that divides it into small pieces, rotates them thus enlarging the contact surface and enhancing the extracted scents and flavours. Refilling the tank makes the cap pass through the hat breaker once more. The complete automation of the process senses the levels in the tanks and sets the pause and working cycles and allows the total control over the final result with a staff reduced to a minimum. Moreover washing cycles can also be integrated and controlled, allowing to every wine cellar the highest quality standards required in the food industry. Palitank stainless steel poles This system is made of reinforced inox tubes fixed to the tank cylinder and to each other by means of a unmountable link, in order to allow an easy dismantling at the end of the wine-making process. When the must is taken from the lower part of the tank and transferred into another tank, the skin cap passes through the tubes and brakes into small pieces that go down to the tank bottom. During the uploading through the spreader, the must soaks the skins and The cap naturally floats and breaks once more. These operations are highly efficient in extracting scents and flavours without using motorized devices. This system can be used on already existing tanks as well, making them easily converted, saving time, money and space. With no moving parts it's very easy to use and install and can be considered the ultimate companion to the wine-making tanks. Rotating spreader Our rotating spreader is a must distribution system whose rotation is easily achieved only by means of the pressure of the uploading pump. The lower part rotates and thanks to the outlet shape the must is spread homogeneously over the skin hat. This system is different from the usual ones (plate shaped) by having a better distribution without the complexity of a motorized device, and can easily be installed on existing tanks.

Attachments

• CATALOGO PDF

Request information about this product

Name*
Surname*
E-mail *
Telephone*
Message
Insert the code shown below
* Your privacy is extremely important to us, and, as such, we will strive to keep your personal information confidential and avoid unwanted solicitations. All information collected, is treated according to the 196/2003 privacy law in Italy. Please fill in all the red fields in order to complete your form. - Please give a valid e-mail address - Please tic the "accept" box. Accept