Steriltank
Steriltank is a tank that can be sterilised and is ideal for the storage of food and /or perishable products. The inside surface finishing is carried out manually and is done with particolar care in order to completely eliminate any possibility of contamination by avoiding ridges, edges and grooves where dirt could accumulate.
Characteristics
- Vertical cylindrical tank, thermostatic or temperature controlled.
- Mounted on legs with 10° conical bottom, completely central, emptying up to 400 hl.
- On a base with 10° conical bottom backward inclined at 3%, from 500 to 1,000 hl.
- Completely insulated using two insulation systems: a double panel in rock wool or polyurethane of 40+40 mm overlapping, crossed and tied as to avoid slippage over time, and with an external shell which is completely welded with satined welding and finish accordino to request: 2b natural, pre-satined, fine satined or lower scroll finish-patterned.
- 10° conical top - Independent reinforcing structure fixed to the inside of the tank to resist swelling durino steam washing on sterilisation.
- The inside of the tanks is mirror finished with welds ground smooth and polished. Internal accessories are attached in such a way that they can be washed and sterilised automatically.
- Complete filling threads and top loading, diameters positions and sizes as requested.
- The feet are completely insulated and boxed in; there are stainless steel screws for adjustments and a stainless steel base cap.
- In the case of the tanks with a base, the structure is completely made of stainless steel and is insulated with polyurethane and closed by sealed welding, with legs that can be attached to the floor.
- Stainless steel outlet valve, with diameter and type as requested.
Custom variants and accessories
- Air release valve of diameter accordino to capacity, with a fly net with moveable cover and fixed internal washing unit for the air release valve.
- Fixed central or lateral washing spheres or mini-jets rotating at 360° or orbitally and of great power
- Upper inspection cover of Ø 400 or 500 mm with side mounting, front or central inspection, opening on the outside with quick release, band or cover type with a central crossbar and hinge. "Flag" type knob opening
- Upper or front support for platform
- Pirex or plex level gauge (Ø 20 mm or 24 mm) with one lower stainless steel valve or closed circuit with 2 stainless steel valves and fixed washing system.
- Steam type level gauge graduated on the outside with coloured counterweight indicator. Inside stainless steel float, guided by stainless steel double wire
- Membrane type "SCHAEFFER" level gauge, dial graduated
- High precision electronic level gauge, consisting in level sensors and a digital display attached to the P.L.C. remote control panels
- Sample tap in stainless steel, on the hatch
- Stainless steel elliptical lower hatch with an inside opening of 400x500 mm, completely sterilisable with a removable seal and supporting arm
- Attachement for refrigerator probe - Dial alcohol thermometer from 0°C to 120°C with external protection made from stainless steel and inside protection of the bulb also in stainless steel.
- Digital 24 Volt thermometer, with external protection in stainless steel and an inside protection of the bulb also in stainless steel with diameter and type as requested.
- Stirrers:
1- vertical slow fixed stirrer in side position.
2 - slow stirrer attached to the tank shell and inclined at 45° with one large propeller only.
3 - fast stirrer attached to the tank shell, inclined at 45° with small propeller.
4 - fast vertical fixed stirrer in central or side position.
5 - light fast stirrer removable even when the tanks are full, attached with a ball valve. 6 - fast and very powerful turbine stirrer for very dense products, attached to the tank shell and inclined at 45° with a single tube-enclosed propeller.
Note: a second washing sphere for the fixed side stirrer for tanks of capacity greater than hl 100.
- Exchange cavity for cooling / heating: exchange cavity made of bossed forced-run sheet steel with predetermined circuit, formed of a double sheet spot- welded at regular intervals, internal thickness 25/10 and external 12/10, and tested to a pressure of 15 bars for a working pressure of max 5 bars. It could be positioned on conical or rounded bottom, on the lower part of the cylinder or the the whole of the cylinder; comes with threads of the entry and exit of coolant from 1
- 1 / 2 according to capacity. It normally works with very cold water or a glycolate solution and with special modifications. It can work with hot water, steam or Freon gas - Round glass sight Ø 120 with washer
- Illuminated viewer for inspection of inside of tank
- Tool storage cupboard at the front below the hatch or in the middle on the conical bottom with threading.
Attachments
Request information about this product
